Forum Replies Created
- December 30, 2019 at 2:07 pm #69432
I would like a 32 long or H&R mag or a 38 special. I thank that would make a nice plinking rifle . single shot would be ok but a bolt action rifle would be perfect .
- December 30, 2019 at 2:05 pm #69431
I would like a 32 long or H&R mag or a 38 special. I thank that would make a nice plinking rifle
- December 9, 2019 at 9:16 pm #69427
Glad your back. Finally got in to post. Would not let me again for awhile today.
- December 9, 2019 at 9:13 pm #69426
My son is now at nas in Pensacola fl. He is taking classes for his mos aircraft electronics. My wife was just there with the kids for thanksgiving weekend to visit. Of course I had to work.
- December 9, 2019 at 9:04 pm #69425
Got my .452 sizer in. Loaded up some lee 450 200 1R made for the 44 black powder revolver and some lee 452 200 swc the lee H&G copy all loaded with bullseye from 4 to 4.6 gr. The black powder bullet seemed to shoot a little better. Trying some other bullets berrys plated ,h & g copy of some sort some hard cast I got gave to me 185 gr swc and some fmj’s 230 gr rn also gave to me. Got probably 500 to 600 bullets gave to me from a co worker that doesn’t load 45 any more. Nice guy
- December 9, 2019 at 8:50 pm #69424
- December 9, 2019 at 8:49 pm #69423
Did you ever do any pressure testing on :2 acp just wondering Hope your truck got fixed. Did body work since the early 80’s your right no body fixes anything anymore. Just replace parts.
- November 2, 2019 at 11:17 am #69421
Just got my 45 die in so I loaded around 150 up last night of 230 gr rn fmj . I loaded up just two of my lead bullet up and they are to big to chamber. They go in almost all the way then stop short. I kind of thought they would do this. I got some sizers and other stuff coming so will size the lead bullets and will be good to go. Will let you know how they shoot.
- October 19, 2019 at 9:11 am #69419
Just got a Springfield full size mill spec 45 acp . What are some of your good loads besides 5 gr of bullseye with the 230 tc lee bullet. Thinking of getting the lee tc bullet and the 200 lee copy of H&G 68. Thanks
- October 15, 2019 at 10:28 pm #69418
This is there standard Springfield 1911 45 acp mill spec model. 5 in barrel full size with parkerized finish. Shot it with fmj’s and shoots really good at 10 and 15 yards. Got a free gave to me 45 acp lee die. Only problem it is a .003 under die. .003 smaller than normal or regular die. So I don’t think a fmj will be a problem but loading lead probably will be. What was the .003 under made for tight match chambers? I think I will order the regular die from lee and a mold. If I can decide which mold to get
- October 15, 2019 at 10:05 pm #69416
Are you using the tumble lube version or the regular one? Finally got a 1911 to try out. Thanks
- October 10, 2019 at 1:44 pm #69415
Shot it again and I really like it.Went out to 15 and 25 yards . 15 yards I did decent but at 25 I need more practice. The group was 7 to 8 in. It’s nice and mild shooting. Need to get more brands of ammo to try out and also get a die so I can reload for it.
- October 8, 2019 at 9:52 pm #69414
Well got a call today that he had ten minutes to get his gear ready and he is now going to infantry training. He was in holding hoping it wasn’t going to be to long . He hates sitting around
- October 8, 2019 at 9:48 pm #69413
Pecan is really good looking stained . I new a guy that used it for cabinets. Looked really good when done.
- October 6, 2019 at 6:59 pm #69412
My grandma had the same glasses. Thanks for the info