I to have much to be thankful for in this time of selfless giving . The holiday funk however drags me down and it seems it takes very little to throw me out of the sleigh and into the snow bank .
I guess this is the first year w/o any of my kids home . I do have the 2 granddaughters , Ms ,and Mom . Also bringing a certain…[Read more]
I haven’t shot a lot of WC those that I have were very soft and low speed . I shot some WC of WW in 9mm and for grins in a 358 Win .
38s like something like AC WW and 2.5-3.0 Red Dot for the 148s . Mine were 358432s . The Lee is a TL isn’t it ?
I’m no more help than others .
I’d go for the CZ also for your described use .
For the cartridge I would go with something like the Lee 312-155 cast soft and HT . I did that with a drill press special custom 200 gr and it worked well in testing but never made it to the field . Depending on length limits with a single fed 200 gr I could get 1800…[Read more]
I have a 2nd model LCP and thick hands .
It is exactly what it is and not 1 thing more .
It is a functional gun that is serviceable to get an attacker off of you and go bang 100% .
I have a G42 that is much better as far as shootablity . Comfort and being inclined to shoot it often .
Rifles are a whole nuther bucket of snakes . Personally I…[Read more]
I added another $20 to the cost today .
I added 2 “T” nuts in 10/24 to match the screws for the cannalure tool on the corner between the RCII and Partner .
I added 11 more 1/4-20 “T” nuts to accommodate 5 shotgun presses on 4 different bases . I’ll track down some countersunk flat top phillips to fill the holes when not in use . For convenience…[Read more]
I took a day and slapped a bench together just to get the tools into a dry place .
44×27 desk top , 1 piece sides 24″ stepped to 12″ by 72″ .
The base is a full 24×36 floor shelf with a 36×18 shallow shelf .
The desktop is 1 1/4″ flooring scrap stepped from 44 to 36 with 15″ out front and a 3″ over hang .
Up top there are 2 8″ deep shelves an…[Read more]
I stand by Lee tools being a tool to do a job that do the job . Sometimes you just need a 2# 8″ Soligen carbon steel cleaver to do the job the easiest fastest way . I’m sure the old Guinsu will cut ribs and slice tomatoes but it doesn’t take the ribs 3-4 at a time then slice tomatoes and half a ham through the bone . I have M5s and I have used…[Read more]
I just wanted to put the diesel after cooler radiator on the 73′ 4V wire the secondaries and slap a mechanical advance Unilight in it . Maybe some clear coat and keep the rat rod look . If I can bump that old 327 up to 8.5:1 and get 18-19 empty on the highway instead of 15 I’m a happy camper .
I guess I’ll just make do with what I have then . The Postell ish 535 , 2@ 415ish and 2 at 350 . Probably plenty for anything in AR short of a zoo break out and placed in Jumbo’s sinuses , eye , ear or neck it’ll probably getter’ done there too .
Depends on the goal I guess .
I have ;
MP 462-425 @ 417
Lyman 458193 @ 415
Lee 458-340 @ 350
NOE 460-543 @ 535 , copy of the 458132 AJN3
MM 453-350 @ 350 , I paper patched it.
454613 @ 385 , it’s a HB Minie paper patched it’s a nice plinker.
465451 …… haven’t cast it yet it might be for the Chessipot .
I had a 458-405 HB this didn’t work…[Read more]