Viewing 3 reply threads
  • Author
    Posts
    • #23507
      Anonymous
      Inactive
      • Bronze
      • Posts: 2
      • Comments: 1
      • Overall: 3

      I need bases to fit a round barrel 1 inch in circumference, the hole spacing on the rifle is 5/8 inch- I will re-drill and tap if necessary.
      If you have the answer please tell me the manufacturers name and the part number.
      Thanks.

    • #23518
      Harter
      Participant
      • Gold
      • ★★★
      • Posts: 76
      • Comments: 807
      • Overall: 883

      I wonder if a mini Mauser mount would work . If you have tooling or a friend with tooling blank rail from Midway is a work around . It is not all that expensive and can be cut to exactly what you need for the job.
      Possibly a contender mount would do the job . A Weaver vender should have a mount that will hit close enough to be final fitted by hand.

    • #23519
      Anonymous
      Inactive
      • Bronze
      • Posts: 2
      • Comments: 1
      • Overall: 3

      Thanks- I finally got an answer form Weaver direct.

    • #23622
      Anonymous
      Inactive
      • Bronze
      • Posts: 0
      • Comments: 1
      • Overall: 1

      Here are some specs on Weaver bases from Brownell’s site. It’s been helpful in the past.

      http://www.brownells.com/GunTech/W-R-Weaver-Company-Mount-Base-Specifications/detail.htm?lid=11214

Viewing 3 reply threads
  • You must be logged in to reply to this topic.

© 2017 Goodsteel Forum. Designed by Covalent Designs, LLC.