This topic contains 3 replies, has 1 voice, and was last updated by  kungfustyle 2 years, 10 months ago.

  • Author
    Posts
  • #32548
     kungfustyle 
    Participant
    • Bronze
    • Posts: 5
    • Comments: 22
    • Overall: 27

    I’ve looked and looked but can’t find any reloading data on Magtech brass and the 410. Of course Hodgdon’s and alliant’s site has info for plastic, but no one has data. Called Hodgdon, nata. Called Magtech, nata. From what I’ve read: Large pistol primer, Powder(?), .430 shot card, 1/2 once shot wad F 410sc or 2 fiber wads one with oil one without, 1/2 ounce of shot, .450 shot card, glue. Does anyone have the info on the powder and amount???? http://www.ballisticproducts.com/ has a load data book but it only contains Black Powder recipes and only for 12, 20 and 16g. I thought this would be a great way to reload the 410 but lack of data stinks. If anyone is interested a Lee reloader knock off: http://lane371.dotster.com/410.html

  • #32595
     Sgt. Mike 
    Participant
    • Gold
    • ★★★
    • Posts: 84
    • Comments: 789
    • Overall: 873

    July/August 2010 issue of Handloader mag (#267) has some data
    shotgun world forum has some info (http://www.shotgunworld.com/bbs/viewtopic.php?t=156249 )
    then of course Blammer did some with this look here ( http://www.blammersboard.com/viewtopic.php?t=60 )

  • #32621
     kungfustyle 
    Participant
    • Bronze
    • Posts: 5
    • Comments: 22
    • Overall: 27

    Thanks Sgt. Mike

  • #32622
     kungfustyle 
    Participant
    • Bronze
    • Posts: 5
    • Comments: 22
    • Overall: 27

    down side is after looking at the references, I haven’t found any data. All say to use 12 to 13 grains of 2400. I haven’t seen and 2400 in 5 years. Hoping for 4227, H110 something that I can get my hands on.

You must be logged in to reply to this topic.

© 2017 Goodsteel Forum. Designed by Covalent Designs, LLC.