Viewing 4 reply threads
  • Author
    Posts
    • #25185
      todd
      Participant
      • Bronze
      • Posts: 16
      • Comments: 38
      • Overall: 54

      i was a little bored today, so i loaded up a few boolits for my 44 mag. since it was too windy(over 20mph) and i just wanted to shoot something , i decided to shoot the 50 yard target. i just got my tripod and my ruger srh(you outta try it with one hand!!! ) out and away to the porch i went. since there is a target up(shot by everything from a 243 up to an ’06) i decided it would be fine. this is the first time i’ve used a warren one hole sight and a marbles front sight, i wasn’t to concerned about accuracy but recoil was.

      i loaded up a 250gr mihek hp(thanks to bullshop) with a 11.5gr of unique. the one hole and marbles worked great, much better than my factory sights. recoil was not much of a problem either. i shot 10 of them with no problems. at 50 yards it goes about 5 – 5 1/2″, thats not too bad using a tripod and one hand. like i said before, i am more interested in recoil than accuracy at this time. the unique was also very good, it seemed to burn nice and clean. i thought it was “explosive dirt” , the trail boss i’ve used before is a little more dirty.

      i should have set the bench up or at least used the primos lift and lock with the tripod, but wanted to shoot the ruger srh with 7.5″ barrel with the 250gr mihek(8bhn). not that i’m lazy or anything , uhhh too windy, it’s 40deg out there, i’ll get mud on my shoes…. .

    • #25242
      Anonymous
      Inactive
      • Bronze
      • Posts: 5
      • Comments: 71
      • Overall: 76

      uhhh too windy, it’s 40deg out there, i’ll get mud on my shoes…. .

      :eek:Sissy…………..probably wear a shirt when you’re frying bacon too…..:eek:

    • #25345
      Anonymous
      Inactive
      • Bronze
      • Posts: 1
      • Comments: 19
      • Overall: 20

      Which Mihec bullet were you shooting? I have two different molds from Mihec for my 44s. The 503 and the 434640. They both shoot good.

    • #25432
      todd
      Participant
      • Bronze
      • Posts: 16
      • Comments: 38
      • Overall: 54

      GaryN;n3704 wrote: Which Mihec bullet were you shooting? I have two different molds from Mihec for my 44s. The 503 and the 434640. They both shoot good.

      that i don’t know. i bought them from bullshop( http:bullshop.weebly.com/bullets.html )

    • #25576
      lmcollins
      Participant
      • Bronze
      • Posts: 1
      • Comments: 4
      • Overall: 5

      The 503 is the Keith type semi-wadcutter.

Viewing 4 reply threads
  • You must be logged in to reply to this topic.

© 2017 Goodsteel Forum. Designed by Covalent Designs, LLC.