• Silver
  • ★★
  • Posts: 17
  • Comments: 288
  • Overall: 305


One thing you need to consider is whether or not your guns will cycle with a particular bullet design. Magazine angle and the feed rampcome into play. You might want to borrow, buy or barter a few of the bullets prior to buying a mold to see if you like them or moreover, if your guns do.

The other thing you might want to do is to slug your barrels. If your 9mms mic out to .357″ or larger a then a 38/357 bullet mold might be more appropriate for your applications.

I hope this helps,

© 2017 Goodsteel Forum. Designed by Covalent Designs, LLC.