#49229
Glenn
Participant
  • Silver
  • ★★
  • Posts: 43
  • Comments: 223
  • Overall: 266

You were absolutely right.  The Temp dial was way off.  I used my casting thermometer and the heat probe from the PID, both of which showed the same temp, and used a sharpie to mark 350F and 400F on the toaster oven.

I PC’d some 45 230TC with HF Red and with the old setting, the bullet would flake off just a tiny big when smashed flat.  With the new setting, then the PC just stretches with the bullet.

I cleaned the barrel on my Star PD and it was PC fouling, no lead came out.  Now to load some more and shoot them to see if it made a difference.

© 2017 Goodsteel Forum. Designed by Covalent Designs, LLC.