• Silver
  • ★★
  • Posts: 1
  • Comments: 293
  • Overall: 294

The technique I use is to weight sort to eliminate potential flyers by selecting the heaviest bullets of each batch cast. Those are the bullets that are most consistent in fillout and thus the better balanced which gives the best accuracy.

Totally agree.  Pus it’s almost impossible to do with inexpensive electronics scales.  Even a good beam scale needs a shield enclosure over it to prevent draft current errors.  Then to take advantage of this method, you need a great set of dies + a very good GC install system.

© 2017 Goodsteel Forum. Designed by Covalent Designs, LLC.